Homematic IP floor heating actuator for up to ten 230 V valve drives The floor heating factor controls a maximum of ten valve drives in water-based floor heating systems that operate at 230 V. So that two heating circuits can be assigned to a heating zone, every second heating zone is equipped with a double clamp terminal. It is controlled via a Homematic IP Access Point (via the app) or CCU3 central control unit (via WebUI) or directly by a wall thermostat. - Included: Homematic IP ten-channel floor heating actuator, two screws, two rawlplugs, user manual - Supply voltage: 230 V/50 Hz - Current consumption: max. 6.3 A - Max. switching capacity: 1,380 W (channel 1), 253 W (channel 2 to 10) - Cable: rigid and flexible cable, 0.12 to 0.5 mm² - Radio frequency: 868.0 - 868.6 MHz, 869.4 - 869.65 MHz - Radio range: 270 m outside - Ambient temperature: 0 °C to 50 °C - Weight: 566 g