RUST-OLEUM® Hard Hat Aerosols Anti-Slip 2400 series are based on a fast drying acrylic modified short oil alkyd. The coloured products are based on lead- and chromate free pigments and contain a special anti-slip additive. Recommended Uses:Should be applied on metal, concrete, ceramic and wood surfaces or properly prepared painted substrates. Steel should be primed with 2169 or 2182.Intended for small maintenance jobs or for touch-up.Should be used interior/exterior in light industrial exposures where anti slip characteristics are required.SpecificationsSize: 500 mlAppearance: Satin Colour: TransparentPropellant: Butane/propane Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 524 - 538 g/l Drying times 20°C/50% r.v. To touch: 20 minutes To handle: 60 minutes To recoat: After 1 hour with itself Full hardness: 7 days Heat resistance: 100°C (dry heat), above 65°C discoloration may occur Coverage: Theoretical: 2.5 m² per spray can at 25 µm dry Practical: Prac