A contemporary and stylish 2 light wall bracket with a chrome finish and glass shades - suitable for use in bathrooms IP44 (ZONES 1 & 2) The lighting circuit within a bathroom should be protected with a 30ma residual current device (RCD) ZONE 0 is inside the bath or shower itself. Any fitting in this zone must be low voltage, (max 12v) and be rated at least IP67 which is immersion proof. ZONE 1 is the area above the bath to a height of 2.25m from the floor. In this zone a minimum rating of IP44 is required. ZONE 2 is an area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor. In this zone an IP rating of at least IP44 is required.   FEATURES: * Wall bracket * Polished chrome finish * Suitable for bathroom (IP44) * Switched   SIZE: * Height:              80mm * Diameter:         120mm * Width:                320mm   BULBS: * Takes 2 x 25W G9 Halogen lamps (Not included)    PART NO: * ELB0950