DC constant power source for LEDs up to 1000mA or 30 watts. Standby loss of only 0.3 watts. Minimum brightness and dimming speed can be set. With children's room and snooze switch. Additionally with light-setting control via PC or with radio buttons. Encrypted radio, bi-directional radio and repeater function can be activated. For panel mounting. 45mm long, 45mm wide, 33mm deep. The nominal output current can be set with a jumper on the circuit board: No connection: 350mA, right aligned (pin 2-3 connected): 700mA, left aligned (pin 1-2 connected): 1000mA. Factory setting 700mA. The input voltage range ranges from 12V DC to a maximum of 36V DC. The input voltage must be selected above the sum of the LED voltage at the output in order for the current control to work. This difference must be at least 6 volts. The total output current x output voltage must not exceed 30 watts. An impulse-proof DC power supply is required, which supplies the required voltage and current of the LED lamp(s).